How to Refill Swiffer Wetjet Solution

How to Refill Swiffer Wetjet Solution

The Swiffer Wetjet is a popular cleaning tool that many households rely on for a quick and easy way to clean their floors. However, purchasing the pre-filled solution bottles can become expensive over time. Luckily, there is a way to refill the Swiffer Wetjet solution yourself, saving you money and reducing waste. In this article, we will walk you through the steps to refill the Swiffer Wetjet solution and answer some frequently asked questions about the process.

Step 1: Gather the Materials
Before you begin refilling the Swiffer Wetjet solution, make sure you have all the necessary materials on hand. You will need an empty Swiffer Wetjet bottle, a bottle of your preferred floor cleaner, water, and a funnel.

Step 2: Empty the Swiffer Wetjet Bottle
Start by removing the cap from the empty Swiffer Wetjet bottle. Pour out any remaining solution into a sink or drain. Rinse the bottle thoroughly with water to remove any residue.

Step 3: Mix the Solution
Using the funnel, pour your preferred floor cleaner into the empty Swiffer Wetjet bottle. The amount of floor cleaner you use will depend on the size of the bottle. It is recommended to fill the bottle about three-quarters full with floor cleaner.

Next, add water to the bottle until it is almost full. Leave a small amount of space at the top to allow for the insertion of the cap.

Step 4: Secure the Cap
Once you have filled the bottle with the floor cleaner and water mixture, securely replace the cap. Make sure it is tightly sealed to prevent any leakage.

See also  An Aqueous Solution Is Neutral When

Step 5: Attach the Bottle to the Swiffer Wetjet
Now that you have refilled the Swiffer Wetjet bottle, it is time to attach it to the cleaning tool. Remove the empty bottle from the Swiffer Wetjet by pressing the release button located on the handle. Set the empty bottle aside.

Take the refilled bottle and align it with the nozzle on the Swiffer Wetjet handle. Push the bottle upward until you hear a click, indicating that it is securely attached.

Step 6: Begin Cleaning
With the refilled Swiffer Wetjet bottle attached, you are now ready to start cleaning your floors. Simply press the button on the handle to release the solution onto the floor, and then glide the Swiffer Wetjet over the surface to clean and mop.


Q: Can I use any floor cleaner to refill the Swiffer Wetjet solution?
A: Yes, you can use any floor cleaner that is safe for your specific flooring type. However, it is recommended to check the manufacturer’s instructions of both the floor cleaner and your flooring to ensure compatibility.

Q: How much water should I mix with the floor cleaner?
A: The amount of water will vary depending on the concentration of the floor cleaner. As a general guideline, aim for a mixture of three parts floor cleaner to one part water. Adjust the ratio to your preference and the desired strength of the solution.

Q: Can I reuse the Swiffer Wetjet solution bottle multiple times?
A: Yes, you can reuse the Swiffer Wetjet bottle multiple times as long as it remains in good condition. Rinse it thoroughly after each use to prevent any residue build-up.

See also  How to Correct a Mistake on Uscis Application

Q: Are there any alternative methods to refill the Swiffer Wetjet solution?
A: Yes, some people prefer to use reusable microfiber pads instead of disposable ones. In this case, you can mix the floor cleaner and water in a spray bottle and spray the solution onto the floor before mopping with the Swiffer Wetjet.

By following these simple steps, you can easily refill the Swiffer Wetjet solution and keep your floors clean without breaking the bank. Not only will you save money, but you will also contribute to reducing waste by reusing the Swiffer Wetjet bottle. So, give it a try and enjoy the convenience of a freshly refilled cleaning solution for your Swiffer Wetjet.

Related Posts